JOB-26-0410

Booking freightAt risk

Conveyor roller shaft, rev C, for Buyer BUY-002, at Shop ON-012.

Buyer: Buyer BUY-002; Mississauga, ON
Quote: CF-Q-26-0926; Accepted 23 Oct 2026
Order: CF-26-10383; Inspecting
Ships by: 5 Nov 2026; Delivery by 9 Nov 2026
Owner: Jordan (demo); Operations, freight and suppliers

Machining for this job

Shops quote the machining alone: the metal arrives cut to size with its mill certificate, and we book every freight leg.

Part: Conveyor roller shaft; BB-2210 rev C
Quantity: 80; 3 operations
Shop finishes by: No date yet; Ships to the buyer 5 Nov 2026
Machining on the cost sheet: $807.00; Rules check price $1,730.45

Machining requests

Each request asks for the machining only. Bids side by side, cheapest first, against the rules check price for the same work.

MR-26-0423: Conveyor roller shaft

80 pieces, sent 13 Oct 2026 to 3 shops, bids due 13 Oct 2026, 15:00

AwardedView request

10Turn bearing seats
20Drill and tap both ends M6 × 1
30Inspect

Bids on MR-26-0423
Shop	Machining	Days	Against check	Capacity	Record	Action
Shop ON-012Windsor, ONAwarded	$807.00$95.00 setup, $8.90 a piece	6 daysReady 26 Oct	47%	55% booked140 h a week	93% on timeNot registered for Controlled Goods	WO-26-3310
Shop QC-011Saint-Laurent, QCNot selected	$846.00$118.00 setup, $9.10 a piece	6 daysReady 26 Oct	49%	71% booked150 h a week	97% on timeControlled Goods registration in progress

Rules check price for the same work: $1,730.45.

Shop NS-014 declined: Our lathes are booked until 9 November.

Write a machining request

Shops quote the machining only. Each gets the drawing, the operations, the quantity and the metal it’ll receive cut to size with its mill certificate.

Metal supplied: 1018; Round bar Ø1.375 in, cut to 8.750 in
Pieces: 81; Cut to size, spares included
Certificate: EN 10204 3.1; Heat 61A205
Arrives at the shop: 28 Oct 2026; From Supplier ON-02 (service centre)

The shop machines the Conveyor roller shaft from this metal and checks the count, the heat and the size against the mill certificate when it arrives.

Operations

All of them, unless the job is split across shops.

10. Turn bearing seatsØ25 j6, lathe
20. Drill and tap both ends M6 × 115 mm deep, lathe
30. Inspect1 in 10, inspection

Quantity

Finished parts

Shops

Active, verified shops with the process and the material, best on-time record first.

Shop NS-014Dartmouth, NS, 3-axis milling, turning
68% booked96% on timeControlled Goods registeredAsked already
Shop ON-007Cambridge, ON, 3-axis milling, 5-axis milling, mill-turn
82% booked94% on timeControlled Goods registeredMissing a process
Shop QC-018Lévis, QC, 3-axis milling, 5-axis milling, grinding
60% booked95% on timeControlled Goods registeredMissing a process

This job is controlledControlled drawings go only to shops registered in the Controlled Goods Program, through the controlled lane. The lane isn’t deployed yet, so a controlled request stops here.

Bids by

Shops usually bid within a working day.

Parts due at the shop’s dock

Ready for our carrier to pick up.

Note to the shops (optional)

What the drawing doesn’t say.

Bids come back to this job and the inbox.

Machining requests

MR-26-0423: Conveyor roller shaft

Work orders

Write a machining request