JOB-26-0421
Quote outOn trackSensor bracket, rev B and 1 more part, for Demo buyer company.
- Buyer
- Demo buyer company
- Kanata, ON
- Order
- Not yet
- When the buyer accepts
- Quote valid to
- 16 Nov 2026
- Owner
- Alex (demo)
- Estimator
Machining for this job
Shops quote the machining alone: the metal arrives cut to size with its mill certificate, and we book every freight leg.
- Part
- Motor mount plate
- DB-1107 rev A, plus 1 more part
- Quantity
- 10
- 4 operations
- Shop finishes by
- No date yet
- Machining on the cost sheet
- $2,170.00
- Rules check price $6,665.13
Machining requests
Each request asks for the machining only. Bids side by side, cheapest first, against the rules check price for the same work.
MR-26-0429: Sensor bracket
50 pieces, sent 2 Nov 2026 to 2 shops, bids due 2 Nov 2026, 14:00
OpenView request
- 10Mill the base, flange and relief pocket, 3-axis, three setups
- 20Bore 2 × Ø30 H7, base and flange
- 30Drill 4 × Ø4.5 in the base; drill and tap 4 × M4 × 0.7 in the flange
- 40Deburr, first article to report
| Shop | Machining | Days | Against check | Capacity | Record | Action |
|---|---|---|---|---|---|---|
| Shop NS-014Dartmouth, NSBest | $1,630.00$180.00 setup, $29.00 a piece | 6 daysReady 15 Nov | 27% | 68% booked120 h a week | 96% on timeControlled Goods registered | |
| Shop NS-021Truro, NS | $2,110.00$460.00 setup, $33.00 a piece | 8 daysReady 17 Nov | 35% | 45% booked80 h a week | 92% on timeNot registered for Controlled Goods |
Rules check price for the same work: $6,042.33.
Shop NS-014: Repeat part: program and fixture from CF-26-10352 on file.
MR-26-0430: Motor mount plate
10 pieces, sent 2 Nov 2026 to 2 shops, bids due 2 Nov 2026, 14:00
OpenView request
- 10Face both sides and profile
- 20Bore the Ø50 H8 pilot
- 30Drill 4 × Ø6.6, tap 4 × M5 × 0.8
- 40Deburr and inspect
| Shop | Machining | Days | Against check | Capacity | Record | Action |
|---|---|---|---|---|---|---|
| Shop NS-014Dartmouth, NSBest | $540.00$220.00 setup, $32.00 a piece | 4 daysReady 13 Nov | 87% | 68% booked120 h a week | 96% on timeControlled Goods registered | |
| Shop NS-021Truro, NS | $605.00$255.00 setup, $35.00 a piece | 5 daysReady 14 Nov | 97% | 45% booked80 h a week | 92% on timeNot registered for Controlled Goods |
Rules check price for the same work: $622.80.
Write a machining request
Shops quote the machining only. Each gets the drawing, the operations, the quantity and the metal it’ll receive cut to size with its mill certificate.