Quote CF-Q-26-0911
AcceptedMounting rail, rev A. Reference RFQ-0885, created 24 Sep 2026 by Priya (demo).
Accepted on 29 Sep 2026
This quote became order CF-26-10334. Its timeline, documents and Canadian content record are on the order.
Parts1
Mounting rail, rev A
Drawing DB-0902, Milled, 2 setups
Measured
This part’s measurements are below. Its 3D view isn’t in the demo.
- Bounding box (mm)
- 240 × 30 × 20
- Width, depth, height
- Volume
- 98.4 cm³
- Surface 282 cm²
- Mass
- 266 g
- In 6061-T6
- Holes
- 12 holes
- 4 threaded M6 × 1
Configuration
As quoted. A quote in review, accepted or expired doesn’t change here.
- Material
- Aluminum 6061-T6
- Finish
- As machined
- Tolerance
- Standard, ISO 2768-m
- Threads and inserts
- 4 × M6 × 1 (Tapped, metric)
- Quantity
- 40 pieces
- Lead time
- Standard
- Inspection
- Standard inspection
Read from the drawing
DB-0902-A.pdf, read automatically. Nothing read is used until you confirm it.
7 to confirm
Design for manufacturing
Checks from the model, the drawing and the estimator.
Nothing blocks machining
The model passes the automatic checks. The notes below are advice.
Long, thin partAdvice
At 240 mm by 20 mm the rail can bow when faced; the shop leaves 0.5 mm and finishes after a stress-relief pass.
From the model
Where it’s made
The shops, finisher, metal suppliers and carriers on this quote. The order ships with a Canadian content record.
- Machined in Nova Scotia by partner shops.
- Finished in the shop, with no outside finisher.
- Metal bought from Canadian metal suppliers and cut to size. The country of melt comes from each mill certificate at purchase.
- Canadian carriers on every leg.
Total (CA$)
$2,030.61