Quote CF-Q-26-0930
AcceptedActuator housing, rev C. Reference RFQ-0897, created 14 Oct 2026 by Priya (demo).
Accepted on 20 Oct 2026
Parts1
Actuator housing, rev C
Drawing DB-0988, Milled, 4 setups
This part’s measurements are below. Its 3D view isn’t in the demo.
- Bounding box (mm)
- 140 × 90 × 55
- Width, depth, height
- Volume
- 310.4 cm³
- Surface 823 cm²
- Mass
- 872 g
- In 7075-T651
- Holes
- 12 holes
- 6 threaded M8 × 1.25
Configuration
As quoted. A quote in review, accepted or expired doesn’t change here.
- Material
- Aluminum 7075-T651
- Finish
- Bead blast
- Tolerance
- Standard, ISO 2768-m
- Threads and inserts
- 6 × M8 × 1.25 (Tapped, metric)
- Quantity
- 12 pieces
- Lead time
- Standard
- Inspection
- CMM report
Read from the drawing
DB-0988-C.pdf, read automatically. Nothing read is used until you confirm it.
Design for manufacturing
Checks from the model, the drawing and the estimator.
Ports at compound angles (Ports)Desk review
Three ports sit at compound angles a 3-axis tool can’t reach. Operations 40 to 60 go to a 5-axis shop; the 3-axis work stays with a 3-axis shop.
From the model
Pocket depthAdvice
The deepest pocket is 4.5 times the corner radius’s tool diameter; a 2 mm radius means a long-reach tool. A 3 mm radius would cut faster.
From the model
Where it’s made
The shops, finisher, metal suppliers and carriers on this quote. The order ships with a Canadian content record.
- Machined in Nova Scotia and Ontario by partner shops.
- Finished in the shop, with no outside finisher.
- Metal bought from Canadian metal suppliers and cut to size. The country of melt comes from each mill certificate at purchase.
- Canadian carriers on every leg.
Total (CA$)
$3,977.43