The model is being measured and the metal line is priced from the dated table. Submit the quote and the desk prices the machining with partner shops, usually the same business day.

Parts1

Add a part

Shaft spacer, rev AReadingDB-1113, Stainless 304, As machinedPending100 pieces

Shaft spacer, rev A

Drawing DB-1113, Turned, 2 setups

Part details

Measuring the model

Faces, holes and features are being measured. The 3D view appears when it’s done.

60% read

Bounding box (mm): 40 × 40 × 35; Width, depth, height
Volume: 24.6 cm³; Surface 77 cm²
Mass: Measuring
Holes: Measuring

Configuration

Choices for this part. Prices update as you change them.

Prices update as you change a choice.

Material

Bought for this job from Canadian metal suppliers and cut to size.

Aluminum 6061-T6-$908.32Brackets, plates, housings, fixturesSteel 1018, cold-finished-$909.72Shafts, spacers, fixturesSteel 4140, pre-hardened-$822.39Drive shafts, gears, toolingStainless 303-$4.83Fittings, pins, sensor housingsStainless 304Spacers, bushings, food and process equipmentStainless 316+$197.80Marine brackets, pump partsBrass C360+$100.11Fittings, electrical contacts

Finish

Anodizing, passivation and powder coat are done by an outside finisher.

As machinedTool marks visible, sharp edges broken, no coating.Bead blastNo changeAn even matte surface, done in the shop and priced on the machining line.Passivation+$345.00Cleans free iron from stainless so it resists corrosion as intended.

Tolerance

The drawing’s own callouts apply on top.

Standard, ISO 2768-mGeneral tolerances for most parts, with the drawing’s own callouts on top.Fine, ISO 2768-fDesk pricesTighter general tolerances; more careful setups and inspection.Tight, ±0.025 mm or betterDesk reviewTighter than the rules price: the quote desk reviews it with the shop.Per the drawingDesk reviewThe drawing’s tolerance block and callouts govern; the desk reads them.

Quantity

Pieces of this part.

Price breaks

Price breaks show once machining is priced.

Lead time

Business days from acceptance to shipping.

EconomyDesk prices22 business days, ships by 7 Dec 2026Standard15 business days, ships by 26 Nov 2026ExpeditedDesk prices8 business days, ships by 17 Nov 2026

Inspection

Every order ships with its inspection report.

Notes for the shop (optional)

Anything the drawing doesn’t say.

Prices match the saved quote.

Design for manufacturing

Checks from the model, the drawing and the estimator.

Reading the modelNote
Faces, holes and the turning axis are being measured. The metal price shows now; the machining price follows from the quote desk.
From the model

Where it’s made

The shops, finisher, metal suppliers and carriers on this quote. The order ships with a Canadian content record.

Machined by a partner shop chosen when it’s priced.
Finished in the shop, with no outside finisher.
Metal bought from Canadian metal suppliers and cut to size. The country of melt comes from each mill certificate at purchase.
Carriers chosen when freight is rated.

Quote summary

MetalBought and cut to size for this job: $1,436.44
MachiningPartner shops, machining only: Waiting on the desk
Freight: Rated with machining
Subtotal: $1,436.44
TaxEstimate taxes forYou choose the delivery address at checkout.: With the total
Total (CA$): Not priced yet

Shaft spacer × 100Pending

Ships by: 26 Nov 2026
Delivered: 27 to 30 Nov 2026 to Kanata, ON
Valid until: Not quoted yet

The desk prices the machining with partner shops, usually the same business day.

Total (CA$)

Not priced yet

Summary

Ask for a review

The quote desk looks at the part with you and replies by email, usually the same business day.

What should the desk look at?

Your note (optional)

What you’d like changed or checked.