Machining request MR-26-0437

To price

Bilge pump bracket HM-118 rev A, 24 pieces, operations 10 to 30. Price by 5 Nov 2026, 14:00.

Drawing

Quantity: 24 pieces; Machining only
Operations: 3 operations; Ops 10 to 30
Metal arrives: 18 Nov 2026; Cut to size, with its mill certificate
Due at your dock: 26 Nov 2026; 8 days after the metal
Bids close: Today; 14:00

Illustrative toolpath

Bilge pump bracket, rev A

HM-118 rev A, 150 × 80 × 8 mm. This part’s 3D view isn’t in the demo.

Bounding box: 150 × 80 × 8; Millimetres
Mass: 578 g; 316
Holes: 6; 0 tapped
Setups: 2; 3-axis mill

Your price

Machining only, on the metal supplied. Metal and freight are ours.

Can’t take this one?

Metal supplied

Bought by CanadaFab from our network of Canadian metal suppliers and delivered to you cut to size.

Grade: 316
Stock: Plate, 0.500 × 3.375 in12.7 × 85.7 mm
Cut length: 6.125 in155.6 mm
Pieces: 24
Certificate: EN 10204 3.1
Heat: On the certificate when it’s cut
Delivered by: 18 Nov 2026

Operations

What you’re pricing: these operations only, on the metal supplied.

Operations
Op	Operation	Specification	Machine
10	Profile from plate	ISO 2768-m	3-axis mill
20	Drill and slot	2 × 8.5 × 20	3-axis mill
30	Deburr and inspect	1 in 5	Inspection

Drawing and model

Each download is logged for the buyer’s security.

bilge-bracket-rev-a.step
STEP model, rev A, 233 KB
Download
HM-118-A.pdf
Drawing, rev A, 122 KB
Download

Critical callouts on HM-118 rev A

Critical callouts on HM-118 rev A
Feature	Requirement	Critical
Mounting slots	2 × 8.5 × 20	Standard

General tolerance ISO 2768-m, in mm.

From the quote desk

Sent 5 Nov 2026, 08:40

Machining-only request MR-26-0437: Bilge pump bracket, 24 pieces

Your price for operations 10, 20, 30 only. Metal arrives cut to size with its mill certificate on 18 Nov 2026. Parts due at your dock on 26 Nov 2026. Reply by 5 Nov 2026.

Quote stage. 316 plate, marine duty: sharp tools and steady feed.

The part

Operations

Drawing and model

Critical callouts on HM-118 rev A

From the quote desk