Quote CF-Q-26-0948

Parts2

Add a part

Sensor bracket, rev BPricedDB-1042, Aluminum 6061-T6, As machined$4,700.0350 pieces
Motor mount plate, rev APricedDB-1107, Aluminum 6061-T6, Anodize, type II, black$1,325.0510 pieces

Motor mount plate, rev A

Drawing DB-1107, Milled, 2 setups

Part details

Motor mount plate, rev A, isometric view

Drag to turn. Click, then scroll to zoom, or pinch. Arrow keys turn, plus and minus zoom, Home goes back to isometric.

Bounding box (mm): 120 × 100 × 12; Width, depth, height
Volume: 112.4 cm³; Surface 278 cm²
Mass: 304 g; In 6061-T6
Holes: 9 holes; 4 threaded M5 × 0.8

Configuration

Choices for this part. Prices update as you change them.

Material

Bought for this job from Canadian metal suppliers and cut to size.

Aluminum 6061-T6Brackets, plates, housings, fixturesAluminum 7075-T651+$90.36Actuator housings, aerospace and defence bracketsAluminum 2024-T351+$70.95Structural fittingsSteel 1018, cold-finished+$247.75Shafts, spacers, fixturesSteel 4140, pre-hardened+$331.75Drive shafts, gears, toolingStainless 304-$93.49Spacers, bushings, food and process equipmentStainless 316+$15.25Marine brackets, pump parts

Finish

Anodizing, passivation and powder coat are done by an outside finisher.

As machined-$396.75Tool marks visible, sharp edges broken, no coating.Bead blast-$317.58An even matte surface, done in the shop and priced on the machining line.Anodize, type II, clear-$80.50A thin, hard oxide layer that keeps the metal’s colour.Anodize, type II, blackThe same oxide layer, dyed black.Hard anodize, type III+$207.00A thick, wear-resistant layer for sliding and abrasive duty.Powder coat-$109.25A durable coloured coating, cured in an oven.

Tolerance

The drawing’s own callouts apply on top.

Standard, ISO 2768-mGeneral tolerances for most parts, with the drawing’s own callouts on top.Fine, ISO 2768-f+$133.33Tighter general tolerances; more careful setups and inspection.Tight, ±0.025 mm or betterDesk reviewTighter than the rules price: the quote desk reviews it with the shop.Per the drawingDesk reviewThe drawing’s tolerance block and callouts govern; the desk reads them.

Threads and inserts

Found in the drawing. Check each one and choose how it’s made.

4 × M5 × 0.8
10 mm deep
How M5 × 0.8 is made

These threads match the drawing

Quantity

Pieces of this part.

Price breaks

Quantity	Unit price
1	$824.75
10Current	$132.51
25	$88.75
50	$75.02
100	$68.00

Lead time

Business days from acceptance to shipping.

Economy-$37.5022 business days, ships by 7 Dec 2026Standard15 business days, ships by 26 Nov 2026Expedited+$187.508 business days, ships by 17 Nov 2026

Inspection

Every order ships with its inspection report.

Notes for the shop (optional)

Anything the drawing doesn’t say.

Prices match the saved quote.

Design for manufacturing

Checks from the model, the drawing and the estimator.

Nothing blocks machining

The model passes the automatic checks. The notes below are advice.

Anodize and the pilot bore (Pilot bore)Advice
Black anodize adds about 0.01 mm a surface. The shop machines the Ø50 H8 bore to allow for it and measures after finishing.
From the drawing
Plate stockNote
Cut from 0.625 in plate: 3.9 mm of stock over the finished thickness, faced on both sides.
From the model

Where it’s made

The shops, finisher, metal suppliers and carriers on this quote. The order ships with a Canadian content record.

Machined in Nova Scotia by partner shops.
Finished in Nova Scotia.
Metal bought from Canadian metal suppliers and cut to size. The country of melt comes from each mill certificate at purchase.
Canadian carriers on every leg.