JOB-26-0412
In productionOn trackActuator housing, rev C, for Demo buyer company, at Shop NS-014 and Shop ON-007.
- Buyer
- Demo buyer company
- Kanata, ON
- Ships by
- 20 Nov 2026
- Delivery by 24 Nov 2026
- Owner
- Alex (demo)
- Estimator
Machining for this job
Shops quote the machining alone: the metal arrives cut to size with its mill certificate, and we book every freight leg.
Split across 2 shops by operation, plan SP-26-0412
Operations 10 to 30 are 3-axis work at Shop NS-014’s rate; only the three angled ports need a 5-axis machine, at Shop ON-007. One quote and one contract for the buyer; we book the leg between the shops.
- Part
- Actuator housing
- DB-0988 rev C
- Quantity
- 12
- 6 operations
- Shop finishes by
- 11 Nov 2026
- Ships to the buyer 20 Nov 2026
- Machining on the cost sheet
- $1,691.00
- Rules check price $3,197.20
Machining requests
Each request asks for the machining only. Bids side by side, cheapest first, against the rules check price for the same work.
MR-26-0425: operations 10 to 30
12 pieces, sent 14 Oct 2026 to 2 shops, bids due 15 Oct 2026, 15:00
AwardedView request
- 10Face datums and square the block
- 20Rough and finish the outer profile
- 30Pockets and tapped holes 6 × M8 × 1.25
| Shop | Machining | Days | Capacity | Record | Action |
|---|---|---|---|---|---|
| Shop NS-014Dartmouth, NSAwarded | $682.00$184.00 setup, $41.50 a piece | 5 daysReady 26 Oct | 68% booked120 h a week | 96% on timeControlled Goods registered | WO-26-0441 |
| Shop NS-021Truro, NSNot selected | $733.00$205.00 setup, $44.00 a piece | 6 daysReady 28 Oct | 45% booked80 h a week | 92% on timeNot registered for Controlled Goods |
Shop NS-014: Operations 10 to 30 only; parts leave for the 5-axis shop with datums marked.
MR-26-0426: operations 40 to 60
12 pieces, sent 14 Oct 2026 to 2 shops, bids due 15 Oct 2026, 15:00
AwardedView request
- 40Ports at compound angles, Ø22 H7
- 50Finish port faces and chamfers
- 60CMM inspection to report
| Shop | Machining | Days | Capacity | Record | Action |
|---|---|---|---|---|---|
| Shop ON-007Cambridge, ONAwarded | $1,009.00$265.00 setup, $62.00 a piece | 4 daysReady 26 Oct | 82% booked160 h a week | 94% on timeControlled Goods registered | WO-26-0712 |
| Shop QC-018Lévis, QCNot selected | $1,064.00$290.00 setup, $64.50 a piece | 5 daysReady 27 Oct | 60% booked110 h a week | 95% on timeControlled Goods registered |
Shop ON-007: 5-axis operations and CMM report only; parts arrive from the 3-axis shop.
Write a machining request
Shops quote the machining only. Each gets the drawing, the operations, the quantity and the metal it’ll receive cut to size with its mill certificate.